...
This exercise assumes the user has completed either Exercise 7.2 or 7.3 and created a set of linked requirements between the SysML model Syndeia_Jama_Mapping_Tutorial.rpy and their Jama repository.
In the Connection Browser tab on the Syndeia dashboard, select the Regulatory Requirements connection created in either exercise. Right-click and compare across that connection before any changes have been made to see that all is in sync (Figure 1).
Figure 1 Connection Browser tab, Syndeia dashboard, comparing across connection
The Comparison Result tab will open and the results should appear similar to Figure 2.
Figure 2 Initial comparison result
Modify the Regulatory Requirements Specification field in Rhapsody and add a sub-requirement, FCC Regulations, as shown in Figure 3.
Compare across the same connection as in Step 2 and display the comparison results (Figure 4).
Figure 4 Comparison Results after modifying Rhapsody requirements
Return to the Connection Browser, click Refresh to show the new child requirement, right-click the Regulatory Requirements connection and select Sync Source -> Target (Figure 5).
Figure 5 Syncing SysML changes to Jama
Repeat the comparison as in Step 2 and check that the Comparison Result shows all green, as in Figure 6.
Figure 6 Comparison Results after syncing SysML to Target
Check the same requirement in Jama through its web interface to see the modified requirement text and sub-requirement (Figure 7). Note that this is now version 2 of the requirement, because it has been modified by the Syndeia update.
Figure 7 Jama web interface showing modified requirements
While in the Jama interface, modify the requirement text again and add one more sub-requirement called Communications Requirement (Figure 8).
Figure 8 Making changes to Jama requirements in Jama web interface
Repeat the comparison as in Step 5 to see the changes (Figure 9).
Figure 9 Comparison Results after modifying Jama requirements
In the Connection Browser, right-click the Regulatory Requirements connection and select Sync Target → Source.
View the new requirement and updated text in the Rhapsody model (Figure 10).
Figure 10 Rhapsody model showing modified requirements
...