Versions Compared

Version Old Version 2 New Version 3
Changes made by

Manas Bajaj

Manas Bajaj

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Create a new SysML project in MagicDrawRhapsody, if you don’t already have a SysML project open, using File > New Project and then selecting SysML Project in the window New and then selecting SysML (Project Type), specifying a name and location, and clicking OK, as also shown below.
    Image Removed
     
  2. Select File > Use Module (MagicDraw 18.0) or File >  Use Project > Use Local Project (MagicDraw 18.5), select <install.root>\profiles, and then select the Syndeia Profile, as shown below. Press the Finish button. If you are prompted to see all Auxiliary Resources in MagicDraw, select No.
    Image Removed

  3. Right click on any element in the MagicDraw model tree (containment tree) and select Syndeia > Settings. This will launch the Syndeia Settings window, as shown below. Image Added

  4. Add the Syndeia Profile: Select File > Add Profile to Model. Browse to the <Syndeia Installation>\profiles\Syndeia folder, e.g. <Your_User_Directory>\IBM\Rational\Rhapsody\8.1.3x64\Share\Profiles\Syndeia\profiles\Syndeia, select the Syndeia.sbs file and click OK, as shown below. 

    Image Added

  5. If you are prompted to add the SysML profile, select No since that profile is already added when the SysML project was created.

    Image Added

  6. The log window is Rhapsody will indicate the initialization of Syndeia and license validation, as shown below.

    Image Added

  7. Right click on the any element in the SysML model tree and select Syndeia > Settings, as shown below. This will launch the Settings window, as shown in the next step.

    Image Added

  8. Set the Select primary store setting to DATABASE, as shown below. Then, specify the IP address of the Syndeia database (Cassandra server) in the Hostname setting, and the username and password provided to you by your Sydneia database administrator in the Username and Password settings. Press Enter after specifying the password. Click the Apply button and then close the Settings window.
    Image Removed
    Image Added

    Note: This setting is used when Syndeia is initialized for a project which happens when the Dashboard is launched for the first time after opening a project– when you add the Syndeia profile to a new project, or open an existing project with the Syndeia profile. Once Syndeia is initialized for a project, then changing the setting will require you to close and reopen the project. However, if the Setting Panel is launched as described above, before Syndeia is initialized (Dashboard is launched), then you will not need to close and reopen the project.