Objectives
...
Part 1: Sync SysML to Jama
Model Transform Requirements using custom mapping spec
Add requirement in SysML, Compare Result, and Sync to Jama
Delete requirement in SysML, Compare Result, and Sync to Jama
Part 2: Sync Jama to SysML
Add requirement in Jama, Compare Result, and Sync to SysML
Delete requirement in Jama, Compare Result, and Sync to SysML
Summarize the 4 main concepts (part 1 and part 2 series), add info panel
Preparation
This exercise assumes the student has
...
After Syndeia is finished syncing, check that the Requirement no longer shows in Jama Connect as shown in Figure 16.
...
Part 2
In Jama, modify the text of ‘Product_Spec’ and add a new Requirement underneath it as shown in Figure 17.
...
From the Syndeia Dashboard, trigger a Comparison of the connection once again. The changes should be shown in Red as seen in Figure 18.
...
From the Connection Browser tab, right click the connection and select ‘Sync Target to Source’ as shown in Figure 19.
...
Return to Cameo/Magicdraw and verify that the new changes have been made in the containment tree and properties shown in Figure 20.
...
From Jama Connect, delete a requirement underneath Product_Spec Requirements as shown in Figure 21.
...
From the Syndeia dashboard, compare the Product_Spec Requirements connection again and check that the deleted requirement appears in red as shown in Figure 22.
...
Now from the Connection Browser, right click on the connection and select ‘Sync Target to Source’ as shown in Figure 23.
...
Check in Cameo that the Requirement ‘Feature_1_Environmental’ has been moved to the Parent Package level in the Containment Tree as shown in Figure 24.
...
Compare the connection from Syndeia one last time to check that everything is showing green.
...