...
- Create a new SysML project in MagicDraw, if you don’t already have a SysML project open, using File > New Project and then selecting SysML Project in the window shown below.
- Select File > Use Module (MagicDraw 18.0) or File > Use Project > Use Local Project (MagicDraw 18.5), select <install.root>\profiles, and then select the Syndeia Profile, as shown below. Press the Finish button. If you are prompted to see all Auxiliary Resources in MagicDraw, select No.
- Right click on any element in the MagicDraw model tree (containment tree) and select Syndeia > Settings. This will launch the Syndeia Settings window, as shown below. Set the Select primary store setting to CLOUD, as shown below. Then, specify the protocol, hostname, and port number for your Syndeia Cloud deployment, and the username and password for your Syndeia Cloud account. Press enter after specifying each value. Click the Apply button when done and then close the Settings window.
Refer to the tutorial on Creating a Syndeia Cloud project to get started.
Notes:
- This setting is used when Syndeia is initialized for a project which happens when the Dashboard is launched for the first time after opening a project. Once Syndeia is initialized for a project, then changing this setting will require you to close and reopen the project. However, if the Setting Panel is launched as described above, before Syndeia is initialized (Dashboard is launched), then you will not need to close and reopen the project.
- This setting is a global setting, i.e. it will apply to all projects once it has been set. If you want to change the setting on a per-project basis, then you must follow the steps above for each project – launch Syndeia settings before launching the Dashboard and change it for that project.