Page Comparison

...

1. Create a new SysML project in MagicDraw, if you don’t already have a SysML project open, using File > New Project and then selecting SysML Project in the window shown below.
   
   
    
2. Select File > Use Module (MagicDraw 18.0) or File >  Use Project > Use Local Project (MagicDraw 18.5), select <install.root>\profiles, and then select the Syndeia Profile, as shown below. Press the Finish button. If you are prompted to see all Auxiliary Resources in MagicDraw, select No.

   Image Modified

3. Right click on any element in the MagicDraw model tree (containment tree) and select Syndeia > Settings. This will launch the Syndeia Settings window, as shown below. Check that the Select primary store setting is set to SYSML_MODEL, as shown below. If not, change it to the SYSML_MODEL click on the Apply button, and close the Settings window.
   
   

...