Page Comparison

Prerequisite: To use Syndeia plugin in cloud mode, your Syndeia administrator should have set up Syndeia Cloud and provided you the hostname (or IP address), port number, username, and password to access Syndeia Cloud from your machine. As a simple test, verify if you can access Syndeia Cloud by going to the URL <protocol>://<hostname>:<port> (e.g. http://mydomain.myhost.com:9000) on your web browser. You should be able to see the landing page of Syndeia Cloud, as shown below. If you don't see the landing page, check with your Syndeia Cloud administrator.

Image RemovedImage Added

By default, Syndeia is configured to operate in the local mode after installation. Follow the steps below to configure Syndeia in the cloud mode.

1. Create a new SysML project in MagicDraw, if you don’t already have a SysML project open, using File > New Project and then selecting SysML Project in the window shown below.
   
   
    
2. Select File > Use Module (MagicDraw 18.0) or File >  Use Project > Use Local Project (MagicDraw 18.5), select <install.root>\profiles, and then select the Syndeia Profile, as shown below. Press the Finish button. If you are prompted to see all Auxiliary Resources in MagicDraw, select No.

   

3. Right click on any element in the MagicDraw model tree (containment tree) and select Syndeia > Settings. This will launch the Syndeia Settings window, as shown below. Set the Select primary store setting to CLOUD, as shown below. Then, specify the protocol, hostname, and port number for your Syndeia Cloud deployment, and the username and password for your Syndeia Cloud account. Press enter after specifying each value. Click the Apply button when done and then close the Settings window.
   Image RemovedImage Added

Refer to the tutorial on Creating a Syndeia Cloud project to get started.

Notes: 

• This setting is used when Syndeia is initialized for a project which happens when the Dashboard is launched for the first time after opening a project. Once Syndeia is initialized for a project, then changing this setting will require you to close and reopen the project. However, if the Setting Panel is launched as described above, before Syndeia is initialized (Dashboard is launched), then you will not need to close and reopen the project. 
  
  
• This setting is a global setting, i.e. it will apply to all projects once it has been set. If you want to change the setting on a per-project basis, then you must follow the steps above for each project – launch Syndeia settings before launching the Dashboard and change it for that project.