Jama - SysML Compare & Sync.

Owned by Copy Page Tree
Sept 20, 2017
2 min read
  1. This exercise assumes the user has completed either Exercise 7.2 or 7.3 and created a set of linked requirements between the SysML model Jama_Tutorial.mdzip and their Jama repository. In this example, we used the conditions after Exercise 7.2.
  2. In the Connection Browser tab on the Syndeia dashboard, select the Regulatory Requirements connection created in either exercise. Right-click and compare across that connection before any changes have been made to see that all is in sync.



  3. The Comparison Result tab will open and the results should appear.



  4. Modify the Regulatory Requirements text field in Rhapsody and add a sub-requirement, FCC Regulations.



  5. Compare across the same connection as in Step 2 and display the comparison results.



  6. Return to the Connection Browser, click Refresh to show the new child requirement, right-click the Regulatory Requirements connection and select Sync SysML -> Target.



  7. Repeat the comparison as in Step 2 and check that the Comparison Result shows all green.



  8. Check the same requirement in Jama through its web interface to see the modified requirement text and sub-requirement.



  9. While in the Jama interface, modify the requirement text again and add one more sub-requirement called Communications Requirement.



  10. Repeat the comparison as in Step 5 to see the changes.



  11. In the Connection Browser, right-click the Regulatory Requirements connection and select Sync Target → SysML.

  12. View the new requirement and updated text in the Rhapsody mode.