The new learning objectives of this exercise are to familiarize the user with creating a new Syndeia Cloud project from Syndeia Standalone.

Preparation

This exercise assumes the student has

Syndeia Standalone 3.2 installed with a valid license for use, and
Syndeia Cloud installed on an accessible server (see Syndeia Cloud installation instructions) and user has a valid account. The user will need to contact the Syndeia Cloud administrator for their organization to get access credentials.

The specific instructions call for creating a new Project on Syndeia Cloud, so no additional interface beyond the Syndeia base module is required.

Syndeia Standalone stores inter-model connections only in a Syndeia Cloud project. If you need to transfer connections from an earlier version to Syndeia Cloud, contact Intercax for assistance (www.intercax.com/help).

Exercise

Double-click the file Syndeia.bat to launch Syndeia Standalone. The Select or Create Syndeia Project window appears as in Figure 1.
Click the Settings button in the lower left corner. The window shown in Figure 2 will appear.
1. Use the pull-down menu to set Select primary store to CLOUD (not SYSML_MODEL).
2. Enter Protocol, Hostname, Port, Username and Password as provided by your Syndeia Cloud administrator.
3. Click Apply (button in upper right corner)
4. Close Syndeia Settings
In the Select or Create Syndeia Project window (Figure 3), create a new project
1. Enter a unique key up to 10 characters
2. Enter a name and description for the new project
3. Click the New button under the Description field
Your new project should now appear in the list Select from existing projects at the top.
1. Select your project and click OK.
2. The Syndeia dashboard should appear. Proceed as normal to create, use or search inter-model connections.

Browser not supported