/
Launching the Syndeia Dashboard

Launching the Syndeia Dashboard

Follow the instructions in this section to launch the Syndeia Dashboard for MagicDraw/Cameo.

(1) Create a new SysML project in MagicDraw, if you don’t already have a SysML project open, using File > New Project, and then selecting SysML Project in the New Project dialog, as shown in Figure 1 below.

image-20240430-204628.png
Figure 1: Create a new SysML Project

(2) Import Syndeia profile: Select File > Use Project > Use Local Project, select <install.root>\profiles, and then select the Syndeia_Profile.mdzip, as shown in Figure 2 below. Click the Finish button. If you are prompted to see all Auxiliary Resources in MagicDraw, select No.

image-20240430-204858.png
Figure 2: Add Syndeia Profile

(3) Right click on a package in the MagicDraw Containment Tree and select Syndeia > Dashboard, as shown in Figure 3 below.

(4) If Syndeia (client) is configured in Cloud mode, you will see the Select or Create Digital Thread Project dialog, as shown in Figure 4 below. Double click an existing Digital Thread Project, or create a new Digital Thread Project, as shown in Figure 4 below. To learn more about Digital Thread Projects, refer to the following.

(5) The Syndeia Dashboard will launch, as shown in Figure 5 below. Note that if you are a new Syndeia user, you will not see any repositories listed but only categories (e.g. Aras, Artifactory, and others) depending upon your license.

 

Related content

Install Syndeia plugin
Install Syndeia plugin
Read with this
Launching the Syndeia Dashboard
Launching the Syndeia Dashboard
More like this
Syndeia 3.6 - New Features and Improvements
Syndeia 3.6 - New Features and Improvements
Read with this
Launching the Syndeia Dashboard
Launching the Syndeia Dashboard
More like this
Launching the Syndeia Dashboard.
Launching the Syndeia Dashboard.
Read with this
Launching the Syndeia Dashboard
Launching the Syndeia Dashboard
More like this