Follow the instructions in this section to launch the Syndeia Dashboard for MagicDraw.
(1) Create a new SysML project in MagicDraw, if you don’t already have a SysML project open, using File > New Project and then selecting SysML Project in the
...
New Project dialog, as shown in Figure 1 below.
...
(2) Import Syndeia profile: Select File > Use Project > Use
...
Local Project,
...
select <install.root>\profiles, and then select the Syndeia_Profile.mdzip, as shown in
...
Figure 2 below. Click the Finish button. If you are prompted to see all Auxiliary Resources in MagicDraw, select No.
...
(3) Right click on a package in the MagicDraw Containment Tree and select Syndeia > Dashboard.
...
(4) If Syndeia (client) is configured in Cloud mode, you will see
...
the Select or Create Digital Thread Project dialog, as shown in Figure 4 below. Double click an existing Digital Thread Project, or create a new Digital Thread Project, as shown below. To learn more about Digital Thread Projects, refer to the following.
...
(5) The Syndeia Dashboard will launch, as shown below. Note that if you are a new Syndeia user, you will not see any repositories listed but only categories (e.g.
...
Aras,
...
Artifactory, and others) depending upon your license.
...