Page Comparison

...

1. Launch the SysML starter project Exercise 1.1 Starter Model _ Alpha (or any other MagicDraw project which includes the Syndeia profile).
2. Right-click any package in the SysML containment browser and select Syndeia → The window shown in Figure 1 will appear.
   
   
   
   
   1. Use the pull-down menu to set Select primary store to CLOUD (not SYSML_MODEL).
   2. Enter Protocol, Hostname, Port, Username and Password as provided by your Syndeia Cloud administrator.
   3. Click Apply (button in upper right corner)
   4. Close Syndeia Settings
      
3. Right-click the top-level package Model in the SysML containment browser and select Syndeia → The Select or Create Syndeia Project window shown in Figure 2 will appear. Under Create a new project:
   1. Enter a unique key up to 10 characters
   2. Enter a name and description for the new project
   3. Click the New button under the Description field
      
      
      
      
4. Your new project should now appear in the list Select from existing projects at the top.
   1. Select your project and click OK.
   2. The Syndeia dashboard should appear. Proceed as normal to create, use or search inter-model connections.

5. If you close the Syndeia dashboard and re-open it in the same modeling session, Syndeia will go directly to the dashboard, assuming that you wish to continue with the same Syndeia project. If you close the Syndeia dashboard and the MagicDraw project, then re-open the MagicDraw project and launch the Syndeia dashboard, you will get the Select or Create Syndeia project window (similar to Figure 2). You can choose the same project as before or a different project, but the connections stored under the original project will not be transferred.