Client License File Creation

All users who would need to use the floating license should be able to access the floating license server machine from their desktops/laptops, and use a client license-server reference-file that points to the floating license server.

Follow these steps to configure the client license.

Locate the file Floating Template.lic included in your license server folder.
Rename the file to <product_name>_<companyName>_client_license_file.lic, where <product_name> is Syndeia (for example) and the <companyName> is the name of your organization.
Open the file in a text editor. You should see something like the following:
```
HOST our.rlm-server.mycompany.edu ANY 5053
ISV intercax
```
Above: usable by ANY client workstation to get a license from our.rlm-server.mycompany.edu if ports 5053 and 5055 are open on that server
```
HOST 192.168.0.123 ANY 5053
ISV intercax
```
Above: usable by ANY client workstation to get a license from 192.168.0.123 if ports 5053 and 5055 are open on that server

HOST [license server name or ip address] [ANY or ether=<MAC_ADDRESS>] [5053 (default) or designated RLM port]
ISV intercax [port=5055 (default) or designated vendor service port]

Make these changes:
1. Replace [license server name or ip address] with the IP address (or URL) of your license server machine
2. Replace [5053 (default) or designated license server port number] with 5053 or a designated license server port your provided to us per the Pre-reqs section here. Example:
```
HOST myLicenseServerHost.mydomain.com ANY 5053
ISV intercax
```
Save and close the file

Provide this file to each user who will be using Syndeia and will need a floating license. They should copy this file into the .syndeia folder under their user directory.